HP HPE0-V14 Dumps Questions Answers

HP HPE0-V14 Dumps

Dumps4download providing 100% reliable Exam dumps that are verified by experts panel. Our Dumps4download HPE0-V14 study material are totally unique and exam questions are valid all over the world. By using our HPE0-V14 dumps we assure you that you will pass your exam on first attempt. You can easily score more than 97%.

100% exam passing Guarantee on your purchased exams.

100% money back guarantee if you will not clear your exam.

HP HPE0-V14 Practice Test Helps You Turn Dreams To Reality!

IT Professionals from every sector are looking up certifications to boost their careers. HP being the leader certification provider earns the most demand in the industry.

The HP Certification is your short-cut to an ever-growing success. In the process, Dumps4download is your strongest coordinator, providing you with the best HPE0-V14 Dumps PDF as well as Online Test Engine. Let’s steer your career to a more stable future with interactive and effective HPE0-V14 Practice Exam Dumps.

Many of our customers are already excelling in their careers after achieving their goals with our help. You can too be a part of that specialized bunch with a little push in the right direction. Let us help you tread the heights of success.

Apply for the HPE0-V14 Exam right away so you can get certified by using our HP Dumps.

Bulk Exams Package

Dumps4download Leads You To A 100% Success in First Attempt!

Our HPE0-V14 Dumps PDF is intended to meet the requirements of the most suitable method for exam preparation. We especially hired a team of experts to make sure you get the latest and compliant HPE0-V14 Practice Test Questions Answers. These questions are been selected according to the most relevance as well as the highest possibility of appearing in the exam. So, you can be sure of your success in the first attempt.

Interactive & Effective HPE0-V14 Dumps PDF + Online Test Engine

Aside from our HP HPE0-V14 Dumps PDF, we invest in your best practice through Online Test Engine. They are designed to reflect the actual exam format covering each topic of your exam. Also, with our interactive interface focusing on the exam preparation is easier than ever. With an easy-to-understand, interactive and effective study material assisting you there is nothing that could go wrong. We are 100% sure that our HPE0-V14 Questions Answers Practice Exam is the best choice you can make to pass the exam with top score.

How Dumps4download Creates Better Opportunities for You!

Dumps4download knows how hard it is for you to beat this tough HP Exam terms and concepts. That is why to ease your preparation we offer the best possible training tactics we know best. Online Test Engine provides you an exam-like environment and PDF helps you take your study guide wherever you are. Best of all, you can download HPE0-V14 Dumps PDF easily or better print it. For the purpose of getting concepts across as easily as possible, we have used simple language. Adding explanations at the end of the HPE0-V14 Questions and Answers Practice Test we ensure nothing slips your grasp.

The exam stimulation is 100 times better than any other test material you would encounter. Besides, if you are troubled with anything concerning Building HPE Hybrid IT Solutions (Rev. 19.41) Exam or the HPE0-V14 Dumps PDF, our 24/7 active team is quick to respond. So, leave us a message and your problem will be solved in a few minutes.

Get an Absolutely Free Demo Today!

Dumps4download offers an absolutely free demo version to test the product with sample features before actually buying it. This shows our concern for your best experience. Once you are thoroughly satisfied with the demo you can get the Building HPE Hybrid IT Solutions (Rev. 19.41) Practice Test Questions instantly.

24/7 Online Support – Anytime, Anywhere

Have a question? You can contact us anytime, anywhere. Our 24/7 Online Support makes sure you have absolutely no problem accessing or using Building HPE Hybrid IT Solutions (Rev. 19.41) Practice Exam Dumps. What’s more, Dumps4download is mobile compatible so you can access the site without having to log in to your Laptop or PC.

Features to use Dumps4download HPE0-V14 Dumps:

• Thousands of satisfied customers.
• Good grades are 100% guaranteed.
• 100% verified by Experts panel.
• Up to date exam data.
• Dumps4download data is 100% trustworthy.
• Passing ratio more than 99%
• 100% money back guarantee.

HP HPE0-V14 Frequently Asked Questions

HP HPE0-V14 Sample Questions

Question # 1

You are reviewing a series of MSA2052 storage designs for a customer’s remote locations. Their largest remote site requires the highest possible level of internal data protection with at least 20 TB of storage. Which disk drive design is adequate for this site?

A. 14 HPE MSA 2 TB drives, configured with RAID1
B. 8 HPE MSA 2 TB drives, configured with RAID5
C. 10 HPE MSA 2 TB drives, configured with RAID0
D. 12 HPE MSA 2 TB drives, configured with RAID6

Show Answer

---

Question # 2

Which storage array feature allows replication between the data center and AWS and Microsoft Azure?

A. Fully Provisioned Virtual Volume
B. Catalyst Copy
C. Cloud volumes
D. Thin Provisioned Virtual Volume

Show Answer

---

Question # 3

A customer needs an HPE Nimble storage solution with 100TB capacity. They want to beable to add more disk capacity if neededWhich HPE tool can help you validate the proposed storage solution and that it issupported by HPE?

A. HPE Ninjastars
B. HPE One Config Advanced
C. HPE Storage Sizing Tool
D. HPE SPOCK

Show Answer

---

Question # 4

A nigh school is implementing a DHCP servers to support then production environment. They have the following requirements • six rack servers, each with 1 CPU from Intel, at least 256GB of RAM. FC Dual Port HBA • HPE Nimble AF20 with 17TB useable capacity • integration into their existing HPE FlexFabric 5710 and HPE SN30O0B Fibre Channel SAN switchesif the customer needs more capacity in the future, they will use scale-out growth. Which server model should you recommend to this client?

A. ProLiant DL 20 Gen10
B. ProLiant DL 325 Gen10
C. ProLiant DL 160 Gen10
D. ProLiant DL 560 Gem10

Show Answer

---

Question # 5

Which storage array feature records only changes made to the base volume and keeps anearlier state of the original volume?

A. snapshot
B. clone
C. virtual volume
D. volume mirror

Show Answer

---

Question # 6

A customer recently installed a VMware environment with HPE ProLiants, HPE MSA storage, and Aruba switches. What should you recommend to the customer to manage their support contracts with HPE?

A. HPE InfoSight
B. HPE Recovery Manager Central
C. Service Pack for ProLiant
D. HPE Insight Online

Show Answer

---

Question # 7

Which series of internal checks will an HPE ProLiant server use to validate that the base hardware components are working correctly before booting the operating system?

A. CMOS
B. EDO
C. POST
D. BIOS

Show Answer

---

Question # 8

A customer just purchased a ProLiant DL385Gemo Plus and warns 10 team more about HPE intelligent Provisioning features. Which task can the customer complete using HPE Intelligent Provisioning?

A. configure OS networking
B. install supported ESXt operating system
C. configure iLO Federation groups
D. deploy OS patches

Show Answer

---

Question # 9

Read the question, and then refer to the exhibit. <Switch-A>display int Ten-GigabitEthernet 1/0/1 Ten-GigabitEthernet1/0/1 Current state:UP Line protocol state: UP IP packet frame type: Ethernet II, hardware address: d894-03fb793d Description: Ten-GigabitEthernet1/0/1 Interface Bandwidth: 10000000 kbps Loopbackis not set Media type is stack wire, port hardware type is STACK SFP_PLUS 10Gbpsspeed mode, full-duplex mode Link speed type is autonegotiation, link duplex type isautonegotiation Flow-control is not enabled Maximum frame length: 10000 Allow jumboframes to pass Broadcast max-ratio: 100% Multicast max-ratio: 100% Unicast max-ratio:100% PVID: 1 MDI type: Automdix Port link-type: Trunk VLAN Passing: 10 VLANpermitted: 10 Trunk port encapsulation: IEEE 802.1q Port priority: 0 <SNIP>An administrator connected a hypervisor to interface Ten-Gigabit Ethernet1/0/1 in a switch.The administrator created virtual machines in VLAN 10 and 20 on the hypervisor. TheseVLANs are configured to be tagged on the hypervisor.The administrator found that all the virtual machines within VLAN 20 can communicate witheach other, but not to any resource on VLAN 20 outside the hypervisor.What must you do to resolve this issue?

A. Configure the interface as an access port.
B. Configure the PVID of the interface to be VLAN 20.
C. Permit VLAN 20 on the interface.
D. Configure the interface as an IRF port.

Show Answer

---

Question # 10

A customer needs a low cost block storage array for targeted workloads. The array needs to provide automated tiering, thin provisioning, and snapshot capabilities. Which HPE storage solution meets the customer requirements?

A. HPE MSA
B. HPE D3000
C. HPE Nimble
D. HPE StoreEasy

Show Answer

---

Question # 11

In which protocol are REST API requests transported?

A. HTTP
B. CRUD
C. SOAP
D. SSH

Show Answer

---

Question # 12

Read the question, and then refer to the exhibit. <Switch-A>display interface Ten-GigabitEthernet 1/0/1 Ten-GigabitEthernet1/0/1 Current state: Administratively DOWN Line protocol state: DOWN IP packet frame type: Ethernet II, hardware address: d894-03fb-793d Description: Ten-GigabitEthernet1/0/1 Interface Bandwidth: 10000000 kbps Loopback is not set Media type is stack wire, port hardware type is STACK_SFP_PLUS Unknown-speed mode, unknown-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled Maximum frame length: 10000 Allow jumbo frames to pass Broadcast max-ratio: 100% Multicast max-ratio: 100% Unicast max-ratio: 100% PVID: 1 MDI type: Automdix Port link-type: Trunk VLAN Passing: 10, 20 VLAN permitted: 10, 20 Trunk port encapsulation: IEEE 802.1q Port priority: 0 Last link flapping: 0 hours 0 minutes 18 seconds Last clearing of counters: Never Peak input rate: 78 bytes/sec, at 2011-03-31 04:55:57 Peak output rate: 15 bytes/sec, at 2011-03-30 23:00:57 Last 300 second input: 0 packets/sec 67 bytes/sec - % Last 300 second output: 0 packets/sec 14 bytes/sec - % Input (total): 62670 packets, 8565340 bytes 0 unicasts, 0 broadcasts, 62670 multicasts, 0 pauses Input (normal): 62670 packets, - bytes 0 unicasts, 0 broadcasts, 62670 multicasts, 0 pauses Input: 0 input errors, 0 runts, 0 giants, 0 throttles 0 CRC, 0 frame, - overruns, 0 aborts – ignored, - parity errors Output (total): 3707 packets, 1294835 bytes 0 unicasts, 0 broadcasts, 3707 multicasts, 0 pauses Output (normal): 3707 packets, - bytes 0 unicasts, 0 broadcasts, 3707 multicasts, 0 pauses Output: 0 output errors, - underruns, - buffer failures 0 aborts, 0 deferred, 0 collisions, 0 late collisions 0 lost carrier, - no carrier A customer added a new switch to their network. They connected it using interface TenGigabitEthernet 1/0/1. They are using VLAN 10 and 20 for the devices in their network. The new switch was fully operational. Then, the customer experienced a power failure later that day and could not reach any device on the new switch after the power returned. From the output in the exhibit, would could be the issue?

A. The interface loopback is not set.
B. The interface link-speed and duplex are unknown.
C. The interface is administratively down.
D. The interface is configured for a PVID of VLAN 1.

Show Answer

---

Question # 13

Which feature in a block storage array eliminates redundant data through the process of using indexes that refer to the original set of data?

A. deduplication
B. compression
C. thin provisioning
D. thick provisioning

Show Answer

---

Question # 14

A. Option A
B. Option B
C. Option C
D. Option D

Show Answer

---

Question # 15

A customer with a Microsoft server environment wants to consolidate their employee home directories and other company file shares presented from an appliance as a single name space.Which HPE product should you recommend to the customer?

A. StoreOnce
B. StoreEasy
C. SimpliVity
D. MSA storage

Show Answer

---

Question # 16

A customer needs to update a server’s firmware using the latest Support Pack for ProLiant (SPP). They use a bootable USB flash drive to do so, and they select Interactive Mode onboot. Once the device boots, they are unsure how to proceed and ask for your assistance. What can you tell them to do to easily update the firmware?

A. Download a new version of Smart Update Manager.
B. From Interactive mode, select the “Force Firmware” option.
C. Reboot the server with the flash drive and leave in default mode.
D. Run interactive mode from the Operating System instead.

Show Answer

---

Question # 17

Which information is contained in the Array Diagnostic Report? (Choose two.)

A. firmware version numbers
B. device status
C. file system types
D. partition types
E. operating system mount points

Show Answer

---

Question # 18

A customer needs to integrate a new digital video surveillance solution into their existing environment and available network ports. The solution needs to include redundant hypervisor servers and a redundant SAN with a shared Fibre Channel attached storage array. You plan to propose the following configuration: 2 HPE DL380 Gen10 servers with dual processors, 384 GB of memory, dual port 10 Gb NIC, and High Performance Fan Kit 1 HPE MSA 2050 Dual Controller Storage Array with 24x 1.8 TB 10 K SAS drives and 96x 7.2K NL drives4 VMware vSphere Standard licenses 1 VMware vCenter Server Foundation licenses 5 year 24x7x4 support for all equipment What must be added to the configuration to provide a complete solution? (Choose two.)

A. 2 HPE 10/25 Gb 2-port 622FLR-SFP28 CNA
B. 2 HPE FlexFabric 5710 switches
C. 2 Aruba 8320 switches
D. 2 HPE SN3000B switches
E. 2 HPE StoreFabric SN1200E 16 Gb Dual Port FC HBAs

Show Answer

---

Question # 19

A customer needs a server memory subsystem that meets the following requirements: approaches the speed of traditional DRAM ensures high capacity, high performance, and ongoing data safety in case of a power failure Which HPE memory feature meets the customer needs?

A. Load Reduced DIMMs
B. Memory Mirroring
C. Fast Fault Tolerance Memory
D. Persistent Memory

Show Answer

---

Question # 20

What is the correct cable type to use when connecting a server to a switch using 10 Gbps Short Range (SR) SFP+ optical connections?

A. Direct Attach Cable (DAC)
B. Twin-Ax
C. Single Mode Fiber
D. Multi-mode Fiber

Show Answer

---

Question # 21

A customer’s backup administrator is responsible for maintaining and coordinating all nightly backups of the company’s 30 servers. Which HPE product can be used as the primary interface to orchestrate all backup targets and Catalyst copy functions?

A. HPE StoreServ
B. Smart Storage Administrator
C. Intelligent Provisioning
D. StoreOnce Management Console

Show Answer

---

Question # 22

Which HPE remote management tool offers simplified warranty and contract case management?

A. HPE InfoSight
B. HPE Insight Online
C. HPE iLO Advanced
D. HPE Smart Update Manager

Show Answer

---

Question # 23

A customer needs a storage solution to host a new virtualization platform that will host a database application. The customer is considering an HPE Nimble array. What features would lead you to propose an HPE Nimble array over an HPE 3PAR array (Select two.)

A. inline deduplication and compression
B. future proof design
C. hyperconverged solution
D. lower operating costs
E. cloud Native

Show Answer

---

Question # 24

Which disk technology provides the lowest latency for performing random reads?

A. NVMe SSD
B. SATA HDD
C. SAS HDD
D. SATA SSD

Show Answer

---

Question # 25

A customer ordered a pair of HPE SN3000B 16 Gb Fibre Channel Switches to provide Fibre Channel connectivity between VMware ESXi hosts and HPE 3PAR StoreServ 8200. Which adapter i s required to support Fibre Channel connectivity from the VMware ESXi hosts to the new switches?

A. HBA
B. SAS
C. CNA
D. NIC

Show Answer

---

Question # 26

A system administrator’s performing the BIOS/Platform configuration of a DL380 Gen10 server. You notice the amber health LED. The health status of which solution components can be verified with embedded UEFI Diagnostics? (Choose two.)

A. UEFI shell
B. Memory
C. Fans
D. Nimble controller
E. iSCSI HBA

Show Answer

---

Question # 27

A customer wants to optimize the performance or its storage array by moving data residing in one class or disks to a more appropriate class of disks based on data access patterns without manual intervention. Which HPE storage techno logy/feature will meet the customer requirement when the data is stored on an HPE 3PAR storage?

A. Configure Adaptive Optimization with a minimum of 2 CPG's
B. Use Wide striping on the Storage Pool level
C. Activate SSD read cache on volume level
D. Enable Automated Tiering on the Storage Pool level

Show Answer

---

Question # 28

What connection type is identified by the following address type? B4-D5-BD-9F-0A-C3

A. IPV6
B. ISCSI
C. MAC Address
D. WWN

Show Answer

---

Question # 29

What does the term composable mean when applied to HPE infrastructure?

A. pay-per-use consumption models
B. hardware-defined infrastructure
C. to provide all-flash like performance, but at a hybrid price point
D. to simplify and accelerate DevOps and business innovation

Show Answer

---

Question # 30

A customer needs a solution for a rack of servers. They need connectivity for 14 HPE DL380 servers, which each have two 10-GBASE-T Ethernet ports, and 10 HPE DL360 servers, which have two 10GBASE-X SFP+ Ethernet ports. They need switch redundancy for each server and want to connect all servers to the same switch stack. The client also needs a 400 Gb backbone connection to the data center core switch from the solution you are creating. Which architecture meets the customer requirements?

A. One VSX stack of two Aruba 8320 48-port 1/10GBASE-X SFP+ switches with the following: 14 10GBASE-T transceivers in each switch 10 SFP+ to SFP+ DACs in each switch Two QSFP+ to Quad SFP+ adapters
B. One IRF stack of wo HPE 5945 2-Slot switches each with the following: One 24-Port SFP28 + 2-Port QSFP28 module One 24-Port 1/10GBASE-T + 2-Port QSFP+ module 10 SFP+ to SFP+ DACs in each switch
C. One IRF stack of two HPE 5945 48-port 1/10GBASE-X SFP+ switches with the following: 14 10GBASE-T transceivers in each switch 10 SFP+ to SFP+ DACs in each switch
D. One VSX stack of two Aruba 8325 48-port 1/10GBASE-X SFP+ switches with the following: 14 10GBASE-T transceivers in each switch 10 SFP+ to SFP+ DACs in each switch

Show Answer

---

Question # 31

A customer has a single ProLiant DL580 Gen10 running ESXI 7.0. They want to remotely power on the server. Which locally available management tool should they use to complete this task?

A. HPE Composer
B. ILO Advanced
C. ILO Amplifier Pack
D. HPE Oneview standard

Show Answer

---

Testimonials

Write a review

Name *

Email *

Review *

Submit